Ello again %)
Mam sprzęcio jak w temacie (TJM uważa, że to nawet nie najgorsze badziewie jest ;) ), ale do rzeczy!
Na starym kompie -> MoBo zdiełano @ 1996 ;) przy próbie zainstalowania Ubuntu Server była mogiła :deadman:.
Obecnie na sporo nowszej płycie instalator wykrywa kontroler iSCSI (sic!)
(http://images40.fotosik.pl/273/0ecc9a5f3dcaf3demed.jpg)
Wchodzę...
(http://images41.fotosik.pl/273/d133d7d8b9419104med.jpg)
I dalej...
(http://images50.fotosik.pl/278/c21db40549ff6f4bmed.jpg)
I ni chu chu nie wiem jak i co... i w jakim celu :ph34r:
Mam tam dwa jednakowe Seagate'y w RAID 1.
Any ideas ???
No przecież pisze co masz robić :)
wpisujesz adres ip + nr portu
No fajnie... jakie IP i jaki numer portu?
localhost - 127.0.0.1 i domyślny port - nie działa
lan IP - 192.168.7.6 i domyślny port - nie działa
(http://images35.fotosik.pl/132/1f1e593081417e76med.jpg)
albo ja tu czegoś nie rozumiem, albo jak zwykle Linuch ma sprzętową czkawkę...
[do usunięcia]
Jak to jest prawidłowe ip kompa 192.168.7.6 to może jakiś firewall blokuje ten port, albo trzeba forwardować port jak jesteś za natem.
Albo tak jak mówisz linuch ma czkawkę :)
Komp ma static IP wpisane w konfiguracji... do sieci fizycznie nie podłączony. Zresztą dla localhosta też powinno działać.
update:
podłączyłem komp do sieci, przypisałem static IP i...
"Tato! Tato! q-pa!!"
czegos tu nie jarze, czemu kontroler ATOwy ma dzialac jako iSCSI ?
Heh to jest właśnie taki myk, że dla biosu, windy to coś jest widoczne pod nazwą SCSI Controller...
Pod Win działa normalnie, z linem jak widzę zawsze są problemy.
popraw mnie jesli sie myle...
ale RAID dla dwoch dyskow to powinienies ustawic chyba z poziomu kontrolera (jego menu) wtedy dla linuxa bedzie widoczny 1 dysk (raid)
co ma linux do tworzenia raid na kontrolerze ? Czy to chodzi ze on go nie rozpoznaje/nie widzi ? jesli tak to czy nie ma takiej magicznej opcji jak przy instalacji windy zeby zapodac sterowniki do nierozpoznanego urzadzenia z innego nosnika ?
Odpal to ubuntu w trybie live CD. Pokaż zawartość
dmesg
Informacje tam zawarte są interesujące, ewentualnie w /var/log/
Twój kontroler (ATA) jest obsługiwany przez moduł siimage. Jest takowy automatyczmie ładowany?
lsmod | grep siimage
Inna para kaloszy to RAID, najpewniej czysto programowy. Może to dmraid i obsługuje, z tym, że dużo łatwiej i bezpieczniej jest użyć mdadm.
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000005f740000 (usable)
[ 0.000000] modified: 000000005f740000 - 000000005f750000 (ACPI data)
[ 0.000000] modified: 000000005f750000 - 000000005f800000 (ACPI NVS)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff380000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 5f192000 - 5f70f098
[ 0.000000] Allocated new RAMDISK: 008ad000 - 00e2a098
[ 0.000000] Move RAMDISK from 000000005f192000 - 000000005f70f097 to 008ad000 - 00e2a097
[ 0.000000] ACPI: RSDP 000fa570 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 5f740000 00030 (v01 A M I OEMRSDT 07000731 MSFT 00000097)
[ 0.000000] ACPI: FACP 5f740200 00081 (v02 A M I OEMFACP 07000731 MSFT 00000097)
[ 0.000000] ACPI: DSDT 5f740370 03B3B (v01 P4i6G P4i6G133 00000133 INTL 02002026)
[ 0.000000] ACPI: FACS 5f750000 00040
[ 0.000000] ACPI: APIC 5f740300 0006C (v01 A M I OEMAPIC 07000731 MSFT 00000097)
[ 0.000000] ACPI: OEMB 5f750040 0003F (v01 A M I OEMBIOS 07000731 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 639MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [00008a9000 - 00008ac091] BRK ==> [00008a9000 - 00008ac091]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [00008ad000 - 0000e2a098] NEW RAMDISK ==> [00008ad000 - 0000e2a098]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0005f740
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0005f740
[ 0.000000] On node 0 totalpages: 390863
[ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1279 pages used for memmap
[ 0.000000] HighMem zone: 162371 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 5f800000 (gap: 5f800000:9f600000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c1bf7000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 387808
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- debian-installer/language=pl console-setup/layoutcode?=pl
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 7819200 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0005f740)
[ 0.000000] Memory: 1528208k/1563904k available (4565k kernel code, 34408k reserved, 2143k data, 540k init, 654600k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2999.451 MHz processor.
[ 0.001446] Console: colour VGA+ 80x25
[ 0.001452] console [tty0] enabled
[ 0.001517] Calibrating delay loop (skipped), value calculated using timer frequency.. 5998.90 BogoMIPS (lpj=11997804)
[ 0.001551] Security Framework initialized
[ 0.001597] AppArmor: AppArmor initialized
[ 0.001608] Mount-cache hash table entries: 512
[ 0.001853] Initializing cgroup subsys ns
[ 0.001863] Initializing cgroup subsys cpuacct
[ 0.001869] Initializing cgroup subsys memory
[ 0.001880] Initializing cgroup subsys freezer
[ 0.001883] Initializing cgroup subsys net_cls
[ 0.001912] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.001916] CPU: L2 cache: 1024K
[ 0.001919] CPU: Physical Processor ID: 0
[ 0.001921] CPU: Processor Core ID: 0
[ 0.001927] mce: CPU supports 4 MCE banks
[ 0.001944] CPU0: Thermal monitoring enabled (TM1)
[ 0.001952] using mwait in idle threads.
[ 0.001965] Performance Counters: no PMU driver, software counters only.
[ 0.001974] Checking 'hlt' instruction... OK.
[ 0.019884] ACPI: Core revision 20090521
[ 0.030181] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.069870] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
[ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5999.75 BogoMIPS (lpj=11999507)
[ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.004000] CPU: L2 cache: 1024K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] mce: CPU supports 4 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM1)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.156965] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
[ 0.156990] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.160050] Brought up 2 CPUs
[ 0.160056] Total of 2 processors activated (11998.65 BogoMIPS).
[ 0.160108] CPU0 attaching sched-domain:
[ 0.160114] domain 0: span 0-1 level SIBLING
[ 0.160119] groups: 0 1
[ 0.160127] CPU1 attaching sched-domain:
[ 0.160131] domain 0: span 0-1 level SIBLING
[ 0.160134] groups: 1 0
[ 0.160259] Booting paravirtualized kernel on bare hardware
[ 0.160303] regulator: core version 0.5
[ 0.160303] Time: 21:29:11 Date: 03/29/10
[ 0.160303] NET: Registered protocol family 16
[ 0.160303] EISA bus registered
[ 0.160315] ACPI: bus type pci registered
[ 0.160459] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[ 0.160464] PCI: Using configuration type 1 for base access
[ 0.161863] bio: create slab <bio-0> at 0
[ 0.164679] ACPI: EC: Look up EC in DSDT
[ 0.172803] ACPI: Interpreter enabled
[ 0.172811] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.172847] ACPI: Using IOAPIC for interrupt routing
[ 0.179566] ACPI: No dock devices found.
[ 0.179726] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.179778] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[ 0.179791] pci 0000:00:00.0: reg 10 32bit mmio: [0xfe800000-0xfebfffff]
[ 0.179868] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
[ 0.179876] pci 0000:00:02.0: reg 14 32bit mmio: [0xff280000-0xff2fffff]
[ 0.179883] pci 0000:00:02.0: reg 18 io port: [0xec00-0xec07]
[ 0.179941] pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff]
[ 0.180056] pci 0000:00:1d.0: reg 20 io port: [0xdc00-0xdc1f]
[ 0.180116] pci 0000:00:1d.1: reg 20 io port: [0xe000-0xe01f]
[ 0.180176] pci 0000:00:1d.2: reg 20 io port: [0xe400-0xe41f]
[ 0.180235] pci 0000:00:1d.3: reg 20 io port: [0xe800-0xe81f]
[ 0.180303] pci 0000:00:1d.7: reg 10 32bit mmio: [0xff27fc00-0xff27ffff]
[ 0.180367] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.180372] pci 0000:00:1d.7: PME# disabled
[ 0.180470] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.180478] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 0.180483] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO
[ 0.180510] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.180518] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.180526] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.180534] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.180542] pci 0000:00:1f.1: reg 20 io port: [0xfc00-0xfc0f]
[ 0.180550] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.180608] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.180674] pci 0000:01:02.0: reg 10 io port: [0xbc00-0xbc07]
[ 0.180681] pci 0000:01:02.0: reg 14 io port: [0xb800-0xb803]
[ 0.180689] pci 0000:01:02.0: reg 18 io port: [0xb400-0xb407]
[ 0.180697] pci 0000:01:02.0: reg 1c io port: [0xb000-0xb003]
[ 0.180704] pci 0000:01:02.0: reg 20 io port: [0xac00-0xac0f]
[ 0.180712] pci 0000:01:02.0: reg 24 32bit mmio: [0xff0ffc00-0xff0ffcff]
[ 0.180720] pci 0000:01:02.0: reg 30 32bit mmio: [0xff000000-0xff07ffff]
[ 0.180740] pci 0000:01:02.0: supports D1 D2
[ 0.180782] pci 0000:01:05.0: reg 10 io port: [0xa800-0xa8ff]
[ 0.180790] pci 0000:01:05.0: reg 14 32bit mmio: [0xff0ef800-0xff0ef8ff]
[ 0.180833] pci 0000:01:05.0: supports D1 D2
[ 0.180836] pci 0000:01:05.0: PME# supported from D1 D2 D3hot D3cold
[ 0.180841] pci 0000:01:05.0: PME# disabled
[ 0.180881] pci 0000:00:1e.0: transparent bridge
[ 0.180887] pci 0000:00:1e.0: bridge io port: [0xa000-0xbfff]
[ 0.180892] pci 0000:00:1e.0: bridge 32bit mmio: [0xfef00000-0xff0fffff]
[ 0.180905] pci_bus 0000:00: on NUMA node 0
[ 0.180911] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.181018] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.183249] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.183386] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.183520] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.183654] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.183792] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.183929] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.184077] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.184213] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.184473] SCSI subsystem initialized
[ 0.184527] libata version 3.00 loaded.
[ 0.184527] usbcore: registered new interface driver usbfs
[ 0.184527] usbcore: registered new interface driver hub
[ 0.184527] usbcore: registered new device driver usb
[ 0.184527] ACPI: WMI: Mapper loaded
[ 0.184527] PCI: Using ACPI for IRQ routing
[ 0.196014] Bluetooth: Core ver 2.15
[ 0.196043] NET: Registered protocol family 31
[ 0.196043] Bluetooth: HCI device and connection manager initialized
[ 0.196043] Bluetooth: HCI socket layer initialized
[ 0.196043] NetLabel: Initializing
[ 0.196043] NetLabel: domain hash size = 128
[ 0.196043] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.196053] NetLabel: unlabeled traffic allowed by default
[ 0.196179] hpet clockevent registered
[ 0.196184] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.196190] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.196198] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.212019] pnp: PnP ACPI init
[ 0.212056] ACPI: bus type pnp registered
[ 0.216617] pnp: PnP ACPI: found 11 devices
[ 0.216621] ACPI: ACPI bus type pnp unregistered
[ 0.216627] PnPBIOS: Disabled by ACPI PNP
[ 0.216647] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 0.216651] system 00:05: ioport range 0x800-0x87f has been reserved
[ 0.216655] system 00:05: ioport range 0x480-0x4bf has been reserved
[ 0.216661] system 00:05: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.216665] system 00:05: iomem range 0xff380000-0xffefffff has been reserved
[ 0.216673] system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.216677] system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.216686] system 00:09: ioport range 0x680-0x6ff has been reserved
[ 0.216690] system 00:09: ioport range 0x295-0x296 has been reserved
[ 0.216699] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 0.216704] system 00:0a: iomem range 0xc0000-0xdffff could not be reserved
[ 0.216708] system 00:0a: iomem range 0xe0000-0xfffff could not be reserved
[ 0.216712] system 00:0a: iomem range 0x100000-0x5f7fffff could not be reserved
[ 0.216716] system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.251452] AppArmor: AppArmor Filesystem Enabled
[ 0.251473] pci 0000:01:02.0: BAR 6: address space collision on of device [0xff000000-0xff07ffff]
[ 0.251500] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.251505] pci 0000:00:1e.0: IO window: 0xa000-0xbfff
[ 0.251512] pci 0000:00:1e.0: MEM window: 0xfef00000-0xff0fffff
[ 0.251517] pci 0000:00:1e.0: PREFETCH window: 0x60000000-0x600fffff
[ 0.251534] pci 0000:00:1e.0: setting latency timer to 64
[ 0.251540] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.251543] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.251547] pci_bus 0000:01: resource 0 io: [0xa000-0xbfff]
[ 0.251550] pci_bus 0000:01: resource 1 mem: [0xfef00000-0xff0fffff]
[ 0.251553] pci_bus 0000:01: resource 2 pref mem [0x60000000-0x600fffff]
[ 0.251556] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.251560] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.251619] NET: Registered protocol family 2
[ 0.251781] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.252362] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.253468] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.254244] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.254248] TCP reno registered
[ 0.254475] NET: Registered protocol family 1
[ 0.254591] Trying to unpack rootfs image as initramfs...
[ 0.697100] Switched to high resolution mode on CPU 1
[ 0.700061] Switched to high resolution mode on CPU 0
[ 2.172995] Freeing initrd memory: 5620k freed
[ 2.182266] cpufreq-nforce2: No nForce2 chipset.
[ 2.182310] Scanning for low memory corruption every 60 seconds
[ 2.182480] audit: initializing netlink socket (disabled)
[ 2.182514] type=2000 audit(1269898153.180:1): initialized
[ 2.191693] highmem bounce pool size: 64 pages
[ 2.191703] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.193624] VFS: Disk quotas dquot_6.5.2
[ 2.193708] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.194461] fuse init (API version 7.12)
[ 2.194571] msgmni has been set to 1718
[ 2.194898] alg: No test for stdrng (krng)
[ 2.194922] io scheduler noop registered
[ 2.194925] io scheduler anticipatory registered
[ 2.194928] io scheduler deadline registered
[ 2.194986] io scheduler cfq registered (default)
[ 2.195006] pci 0000:00:02.0: Boot video device
[ 2.195209] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.195245] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.195428] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.195434] ACPI: Power Button [PWRF]
[ 2.195510] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 2.195514] ACPI: Power Button [PWRB]
[ 2.196051] processor LNXCPU:00: registered as cooling_device0
[ 2.196058] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.196228] processor LNXCPU:01: registered as cooling_device1
[ 2.199385] isapnp: Scanning for PnP cards...
[ 2.553227] isapnp: No Plug & Play device found
[ 2.554768] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.556553] brd: module loaded
[ 2.557173] loop: module loaded
[ 2.557276] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 2.557426] ata_piix 0000:00:1f.1: version 2.13
[ 2.557450] alloc irq_desc for 18 on node -1
[ 2.557454] alloc kstat_irqs on node -1
[ 2.557466] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.557532] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.557658] scsi0 : ata_piix
[ 2.557790] scsi1 : ata_piix
[ 2.559703] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 2.559708] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 2.560508] pata_sil680 0000:01:02.0: version 0.4.9
[ 2.560525] alloc irq_desc for 23 on node -1
[ 2.560528] alloc kstat_irqs on node -1
[ 2.560535] pata_sil680 0000:01:02.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.560560] sil680: 133MHz clock.
[ 2.560714] scsi2 : pata_sil680
[ 2.560838] scsi3 : pata_sil680
[ 2.560903] ata3: PATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xac00 irq 23
[ 2.560909] ata4: PATA max UDMA/133 cmd 0xb400 ctl 0xb000 bmdma 0xac08 irq 23
[ 2.561464] Fixed MDIO Bus: probed
[ 2.561516] PPP generic driver version 2.4.2
[ 2.561692] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.561722] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 2.561746] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.561751] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.561823] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.565752] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.565761] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 2.565771] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff27fc00
[ 2.580513] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.580615] usb usb1: configuration #1 chosen from 1 choice
[ 2.580663] hub 1-0:1.0: USB hub found
[ 2.580678] hub 1-0:1.0: 8 ports detected
[ 2.580770] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.580792] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.580848] alloc irq_desc for 16 on node -1
[ 2.580852] alloc kstat_irqs on node -1
[ 2.580861] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.580869] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.580874] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.580917] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.580951] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000dc00
[ 2.581061] usb usb2: configuration #1 chosen from 1 choice
[ 2.581098] hub 2-0:1.0: USB hub found
[ 2.581111] hub 2-0:1.0: 2 ports detected
[ 2.581175] alloc irq_desc for 19 on node -1
[ 2.581178] alloc kstat_irqs on node -1
[ 2.581185] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.581193] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.581197] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.581238] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.581270] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000
[ 2.581389] usb usb3: configuration #1 chosen from 1 choice
[ 2.581426] hub 3-0:1.0: USB hub found
[ 2.581437] hub 3-0:1.0: 2 ports detected
[ 2.581504] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.581512] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.581516] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.581557] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.581588] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
[ 2.581696] usb usb4: configuration #1 chosen from 1 choice
[ 2.581733] hub 4-0:1.0: USB hub found
[ 2.581745] hub 4-0:1.0: 2 ports detected
[ 2.581805] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.581812] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.581816] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.581861] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.581883] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e800
[ 2.581985] usb usb5: configuration #1 chosen from 1 choice
[ 2.582022] hub 5-0:1.0: USB hub found
[ 2.582033] hub 5-0:1.0: 2 ports detected
[ 2.582167] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.584787] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.584800] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.584927] mice: PS/2 mouse device common for all mice
[ 2.585062] rtc_cmos 00:02: RTC can wake from S4
[ 2.585112] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.585137] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 2.585286] device-mapper: uevent: version 1.0.3
[ 2.585416] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.585521] device-mapper: multipath: version 1.1.0 loaded
[ 2.585526] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.585691] EISA: Probing bus 0 at eisa.0
[ 2.585730] EISA: Detected 0 cards.
[ 2.585864] cpuidle: using governor ladder
[ 2.585869] cpuidle: using governor menu
[ 2.586621] TCP cubic registered
[ 2.586793] NET: Registered protocol family 10
[ 2.587475] lo: Disabled Privacy Extensions
[ 2.587967] NET: Registered protocol family 17
[ 2.587995] Bluetooth: L2CAP ver 2.13
[ 2.587998] Bluetooth: L2CAP socket layer initialized
[ 2.588022] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.588025] Bluetooth: SCO socket layer initialized
[ 2.588072] Bluetooth: RFCOMM TTY layer initialized
[ 2.588077] Bluetooth: RFCOMM socket layer initialized
[ 2.588080] Bluetooth: RFCOMM ver 1.11
[ 2.588138] Using IPI No-Shortcut mode
[ 2.588227] PM: Resume from disk failed.
[ 2.588248] registered taskstats version 1
[ 2.588382] Magic number: 2:316:501
[ 2.588479] rtc_cmos 00:02: setting system clock to 2010-03-29 21:29:14 UTC (1269898154)
[ 2.588484] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.588487] EDD information not available.
[ 2.605121] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.716972] ata2.01: ATAPI: HL-DT-ST GCE-8525B, 1.03, max UDMA/33
[ 2.732454] ata2.01: configured for UDMA/33
[ 2.733030] scsi 1:0:1:0: CD-ROM HL-DT-ST CD-RW GCE-8525B 1.03 PQ: 0 ANSI: 5
[ 2.734587] sr0: scsi3-mmc drive: 40x/52x writer cd/rw xa/form2 cdda tray
[ 2.734592] Uniform CD-ROM driver Revision: 3.20
[ 2.734717] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 2.734785] sr 1:0:1:0: Attached scsi generic sg0 type 5
[ 2.775805] ata3.00: ATA-7: ST3320620A, 3.AAE, max UDMA/100
[ 2.775809] ata3.00: 625142448 sectors, multi 16: LBA48
[ 2.842383] ata3.00: configured for UDMA/100
[ 2.842487] scsi 2:0:0:0: Direct-Access ATA ST3320620A 3.AA PQ: 0 ANSI: 5
[ 2.842669] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.842693] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.842772] sd 2:0:0:0: [sda] Write Protect is off
[ 2.842776] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.842812] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.842999] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 2.905612] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.192303] ata4.00: HPA unlocked: 625140335 -> 625142448, native 625142448
[ 3.192310] ata4.00: ATA-7: ST3320620A, 3.AAE, max UDMA/100
[ 3.192313] ata4.00: 625142448 sectors, multi 16: LBA48
[ 3.238020] ata4.00: configured for UDMA/100
[ 3.238141] scsi 3:0:0:0: Direct-Access ATA ST3320620A 3.AA PQ: 0 ANSI: 5
[ 3.238306] sd 3:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 3.238347] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 3.238406] sd 3:0:0:0: [sdb] Write Protect is off
[ 3.238410] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.238447] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.238618] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 >
[ 3.303129] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 3.303164] Freeing unused kernel memory: 540k freed
[ 3.303975] Write protecting the kernel text: 4568k
[ 3.304038] Write protecting the kernel read-only data: 1836k
[ 3.476257] Linux agpgart interface v0.103
[ 3.483358] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[ 3.483989] agpgart-intel 0000:00:00.0: detected 8060K stolen memory
[ 3.495158] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[ 3.582998] [drm] Initialized drm 1.1.0 20060810
[ 3.674509] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.674522] i915 0000:00:02.0: setting latency timer to 64
[ 3.686654] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 3.686708] 8139cp 0000:01:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 3.692082] 8139too Fast Ethernet driver 0.9.28
[ 3.692150] alloc irq_desc for 22 on node -1
[ 3.692154] alloc kstat_irqs on node -1
[ 3.692167] 8139too 0000:01:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.693997] eth0: RealTek RTL8139 at 0xa800, 00:19:66:61:3e:d8, IRQ 22
[ 3.847181] [drm] fb0: inteldrmfb frame buffer device
[ 3.847197] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.935127] render error detected, EIR: 0x00000010
[ 3.935133] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking
[ 3.935147] render error detected, EIR: 0x00000010
[ 3.942118] [drm] DAC-5: set mode 1920x1080 17
[ 3.954732] Console: switching to colour frame buffer device 240x67
[ 4.517165] xor: automatically using best checksumming function: pIII_sse
[ 4.536003] pIII_sse : 4535.000 MB/sec
[ 4.536010] xor: using function: pIII_sse (4535.000 MB/sec)
[ 4.539316] device-mapper: dm-raid45: initialized v0.2594b
[ 6.427466] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 6.446614] ISO 9660 Extensions: RRIP_1991A
[ 6.672618] aufs 2-standalone.tree-30-20090727
[ 6.882426] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 60.960295] udev: starting version 147
[ 61.810525] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 61.921991] intel_rng: FWH not detected
[ 62.089395] psmouse serio1: ID: 10 00 64
[ 62.639211] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 63.464839] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 66.263312] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 76.404016] eth0: no IPv6 routers present
[ 79.108203] lp: driver loaded but no devices found
[ 79.268299] ppdev: user-space parallel port driver
[ 86.662888] CPU0 attaching NULL sched-domain.
[ 86.662898] CPU1 attaching NULL sched-domain.
[ 86.680191] CPU0 attaching sched-domain:
[ 86.680200] domain 0: span 0-1 level SIBLING
[ 86.680206] groups: 0 1
[ 86.680216] domain 1: span 0-1 level MC
[ 86.680221] groups: 0-1 (__cpu_power = 2048)
[ 86.680234] CPU1 attaching sched-domain:
[ 86.680239] domain 0: span 0-1 level SIBLING
[ 86.680244] groups: 1 0
[ 86.680252] domain 1: span 0-1 level MC
[ 86.680256] groups: 0-1 (__cpu_power = 2048)
[ 89.415171] CPU0 attaching NULL sched-domain.
[ 89.415191] CPU1 attaching NULL sched-domain.
[ 89.424628] CPU0 attaching sched-domain:
[ 89.424635] domain 0: span 0-1 level SIBLING
[ 89.424639] groups: 0 1
[ 89.424649] CPU1 attaching sched-domain:
[ 89.424652] domain 0: span 0-1 level SIBLING
[ 89.424655] groups: 1 0
modułu siimage nie ładuje (domyślnie), ALE
w trybie livecd narzędzie Disk utility i GParted widzi 2 dyski...
i pytanie - gdzie w modconf szukać ew. siimage ?
Jak widać kontroler ATA bez problemu jest obsługiwany a dyski widoczne.
Moduł to nie siimage tylko chyba pata_sil680.
Uwaga! To jest zwykły fake raid. W linuksie za to odpowiada dmraid.
Wrzuć do wysukiwarki "+dmraid +ubuntu +faq".
Konfiguruj, jeśli koniecznie chcesz mieć dostęp do niego z poziomu linuksa.
Ja się zapytam jaki to ma sens i po co? Wspóldzielić ten RAID między dwa systemy.
A jaki system plików? Ntfs-3g!?
Wydajność pod linuksem średnia.
w przypadku większości tego typu kontrolerów, zwanych softRAID, funkcje macierzy realizowane są przez sterowniki - w związku z czym pod windowsem działa to ok ale dla linuxa trzeba zrobić to inaczej - utworzyć partycje pod raid, spiać je i dopiero utworzyć właściwą partycje na woluminie raid
w ubuntu 9.x można bez problemu zrobić takiego raida z instalatora - sam korzystałem z textowej wersji i działa bez problemu
Dałem sobie luz. SoftRAID postawiłem...