opensuse 11.2 boinc manager

[stream]

Witam. Pobrałem za pomocą YAST Boinc manager. Problem w tym ,że nie potrafie podłączyc się do projektu. Manager jest disconected, gdy próbuje przyłączyć się do projektu nic sie nie dzieje. Jak mam to zrobić żeby działało w trybie graficznym?

[Troll81]

manager nie łączy sie z klientem i tu chyba jest problem :D działasz z konta roota czy jakiegoś zwyklego usera??

[stream]

Działam jako zwykły użytkownik.

[emik]

stream odezwij się do mnie na GG: 3258062 to ci pomogę - sam używam suse i po pierwsze odinstaluj tego BOINCA, bo w repo jest stara wersja

[Troll81]

:D a po drugie próbuj z konta roota :D

[emik]

ja mam uruchomiane jako user i nie ma potrzeby wchodzić na root'a XP


manager jest disconected, bo najpierw trzeba odpalać klienta a dopiero później managera - jak się odezwiesz na gg to wyślę ci skrypt, który automatycznie uruchamia boinca przy starcie systemu

[lolek]

na ubuntu bez problemu działa z pod user

[emik]

moja instrukcja instalacji BOINCA pod linuxem:

1. ściągamy najnowszą wersję boinca i zapisujemy ją na pulpit

2. w konsoli przechodzimy w katalog pulpitu i wpisujemy: sh nazwa_pliku_ściągniętego_boinca

3. tworzymy skrypt:

Kod [Zaznacz] Rozwiń


#! /bin/sh
#
# This file is based on the original template made by Kurt Garloff
# Copyright (c) 1995-2004 SUSE Linux AG, Nuernberg, Germany.
# All rights reserved.
#
# /etc/init.d/boinc
#   and its symbolic link
# /(usr/)sbin/rcboinc
#
#    This program is free software; you can redistribute it and/or modify
#    it under the terms of the GNU General Public License as published by
#    the Free Software Foundation; either version 2 of the License, or
#    (at your option) any later version.
#
#    This program is distributed in the hope that it will be useful,
#    but WITHOUT ANY WARRANTY; without even the implied warranty of
#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#    GNU General Public License for more details.
#
#    You should have received a copy of the GNU General Public License
#    along with this program; if not, write to the Free Software
#    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
# System startup script for boinc
#
# LSB compatible service control script; see http://www.linuxbase.org/spec/
#
# Note: This template uses functions rc_XXX defined in /etc/rc.status on
# UnitedLinux (UL) based Linux distributions. If you want to base your
# script on this template and ensure that it works on non UL based LSB
# compliant Linux distributions, you either have to provide the rc.status
# functions from UL or change the script to work without them.
#
### BEGIN INIT INFO
# Provides:          boinc
# Required-Start:    $ALL
# Should-Start: $ALL
# Required-Stop:     $ALL
# Should-Stop: $ALL
# Default-Start:     3 5
# Default-Stop:      0 1 2 6
# Short-Description: boinc daemon
# Description:       Start boinc for distributed computing processes
# e.g. Seti@Home
### END INIT INFO


# Check for missing binaries (stale symlinks should not happen)
# Note: Special treatment of stop for LSB conformance
BOINC_DIR=/home/emik/Pulpit/BOINC
BOINC_USER=emik
BOINC_LOGFILE=/home/emik/Pulpit/BOINC/stdoutdae.txt
BOINC_BIN=$BOINC_DIR/boinc
test -x $BOINC_BIN || { echo "$BOINC_BIN not installed";
if [ "$1" = "stop" ]; then exit 0;
else exit 5; fi; }

# Check for existence of needed config file and read it

# Source LSB init functions
# providing start_daemon, killproc, pidofproc,
# log_success_msg, log_failure_msg and log_warning_msg.
# This is currently not used by UnitedLinux based distributions and
# not needed for init scripts for UnitedLinux only. If it is used,
# the functions from rc.status should not be sourced or used.
#. /lib/lsb/init-functions

# Shell functions sourced from /etc/rc.status:
#      rc_check         check and set local and overall rc status
#      rc_status        check and set local and overall rc status
#      rc_status -v     be verbose in local rc status and clear it afterwards
#      rc_status -v -r  ditto and clear both the local and overall rc status
#      rc_status -s     display "skipped" and exit with status 3
#      rc_status -u     display "unused" and exit with status 3
#      rc_failed        set local and overall rc status to failed
#      rc_failed <num>  set local and overall rc status to <num>
#      rc_reset         clear both the local and overall rc status
#      rc_exit          exit appropriate to overall rc status
#      rc_active        checks whether a service is activated by symlinks
. /etc/rc.status

# Reset status of this service
rc_reset

# Return values acc. to LSB for all commands but status:
# 0  - success
# 1       - generic or unspecified error
# 2       - invalid or excess argument(s)
# 3       - unimplemented feature (e.g. "reload")
# 4       - user had insufficient privileges
# 5       - program is not installed
# 6       - program is not configured
# 7       - program is not running
# 8--199  - reserved (8--99 LSB, 100--149 distrib, 150--199 appl)
#
# Note that starting an already running service, stopping
# or restarting a not-running service as well as the restart
# with force-reload (in case signaling is not supported) are
# considered a success.

case "$1" in
   start)
echo -n "Starting boinc "
## Start daemon with startproc(8). If this fails
## the return value is set appropriately by startproc.
cd $BOINC_DIR
chown $BOINC_USER $BOINC_LOGFILE
startproc -u $BOINC_USER -l $BOINC_LOGFILE -s $BOINC_BIN -dir $BOINC_DIR

# Remember status and be verbose
rc_status -v
;;
   stop)
echo -n "Shutting down boinc "
## Stop daemon with killproc(8) and if this fails
## killproc sets the return value according to LSB.

killproc -TERM $BOINC_BIN

# Remember status and be verbose
rc_status -v
;;
   try-restart|condrestart)
## Do a restart only if the service was active before.
## Note: try-restart is now part of LSB (as of 1.9).
## RH has a similar command named condrestart.
if test "$1" = "condrestart"; then
echo "${attn} Use try-restart ${done}(LSB)${attn} rather than condrestart ${warn}(RH)${norm}"
fi
$0 status
if test $? = 0; then
$0 restart
else
rc_reset # Not running is not a failure.
fi
# Remember status and be quiet
rc_status
;;
   restart)
## Stop the service and regardless of whether it was
## running or not, start it again.
$0 stop
$0 start

# Remember status and be quiet
rc_status
;;
   force-reload)
## Actually restarts the service
$0 try-restart
rc_status
;;
   reload)
## Actually does nothing
rc_failed 3
rc_status -v
;;
   status)
echo -n "Checking for service boinc "
## Check status with checkproc(8), if process is running
## checkproc will return with exit status 0.

# Return value is slightly different for the status command:
# 0 - service up and running
# 1 - service dead, but /var/run/  pid  file exists
# 2 - service dead, but /var/lock/ lock file exists
# 3 - service not running (unused)
# 4 - service status unknown :-(
# 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.)

# NOTE: checkproc returns LSB compliant status values.
checkproc $BOINC_BIN
# NOTE: rc_status knows that we called this init script with
# "status" option and adapts its messages accordingly.
rc_status -v
;;
   *)
echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload}"
exit 1
;;
esac
rc_exit


4. w skrypcie w miejscu:

BOINC_DIR=/home/emik/Pulpit/BOINC
BOINC_USER=emik
BOINC_LOGFILE=/home/emik/Pulpit/BOINC/stdoutdae.txt
BOINC_BIN=$BOINC_DIR/boinc

wpisujemy swoje ścieżki dostępu i swoją nazwę usera

5. jako root zapisujemy skrypt w /etc/init.d/

6. wchodzimy Yast->System->Usługi_systemowe->Tryb zaawansowany znajdujemy boinc, zaznaczamy tryb pracy 3 i 5

7. Klikamy Uruchom/Zatrzymaj/Odśwież i dajemy Uruchom teraz - wyskoczy komunikat, że boinc uuchomiony więc klikamy OK aby zapisać usługi

8. klient będzie nam się automatycznie uruchamiał przy starcie systemu

9. na pulpicie możemy utworzyć sobie skrót do polecenia run_manager które jest w katalogu BOINC