Aktualności:

W MEDIA znajdziesz grafiki, banery i avatary

Menu główne

Medley Sil 0680 ATA133 RAID PCI Controller & Linuks

Zaczęty przez Szopler, 29 Marzec 2010, 19:08

Szopler

Ello again %)

Mam sprzęcio jak w temacie (TJM uważa, że to nawet nie najgorsze badziewie jest ;) ), ale do rzeczy!
Na starym kompie -> MoBo zdiełano @ 1996 ;) przy próbie zainstalowania Ubuntu Server była mogiła :deadman:.
Obecnie na sporo nowszej płycie instalator wykrywa kontroler iSCSI (sic!)


Wchodzę...


I dalej...


I ni chu chu nie wiem jak i co... i w jakim celu :ph34r:
Mam tam dwa jednakowe Seagate'y w RAID 1.

Any ideas ???

S6X

No przecież pisze co masz robić  :)
wpisujesz adres ip + nr portu

Szopler

No fajnie... jakie IP i jaki numer portu?

localhost - 127.0.0.1 i domyślny port - nie działa
lan IP - 192.168.7.6 i domyślny port - nie działa



albo ja tu czegoś nie rozumiem, albo jak zwykle Linuch ma sprzętową czkawkę...

krzyszp


Fajne zegarki :)
Należę do drużyny BOINC@Poland
 Moja wizytówka

S6X

Jak to jest prawidłowe ip kompa 192.168.7.6 to może jakiś firewall blokuje ten port, albo trzeba forwardować port jak jesteś za natem.
Albo tak jak mówisz linuch ma czkawkę  :)

Szopler

#5
Komp ma static IP wpisane w konfiguracji... do sieci fizycznie nie podłączony. Zresztą dla localhosta też powinno działać.

update:
podłączyłem komp do sieci, przypisałem static IP i...

"Tato! Tato! q-pa!!"

Tomasz R. Gwiazda

czegos tu nie jarze, czemu kontroler ATOwy ma dzialac jako iSCSI ?

Szopler

Heh to jest właśnie taki myk, że dla biosu, windy to coś jest widoczne pod nazwą SCSI Controller...
Pod Win działa normalnie, z linem jak widzę zawsze są problemy.

Tomasz R. Gwiazda

popraw mnie jesli sie myle...
ale RAID dla dwoch dyskow to powinienies ustawic chyba z poziomu kontrolera (jego menu) wtedy dla linuxa bedzie widoczny 1 dysk (raid)

co ma linux do tworzenia raid na kontrolerze ? Czy to chodzi ze on go nie rozpoznaje/nie widzi ? jesli tak to czy nie ma takiej magicznej opcji jak przy instalacji windy zeby zapodac sterowniki do nierozpoznanego urzadzenia z innego nosnika ?

buninek

Odpal to ubuntu w trybie live CD. Pokaż zawartość
dmesg
Informacje tam zawarte są interesujące, ewentualnie w /var/log/

Twój kontroler (ATA) jest obsługiwany przez moduł siimage. Jest takowy automatyczmie ładowany?
lsmod | grep siimage

Inna para kaloszy to RAID, najpewniej czysto programowy. Może to dmraid i obsługuje, z tym, że dużo łatwiej i bezpieczniej jest użyć mdadm.



Szopler

#10

[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000005f740000 (usable)
[    0.000000]  modified: 000000005f740000 - 000000005f750000 (ACPI data)
[    0.000000]  modified: 000000005f750000 - 000000005f800000 (ACPI NVS)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000ff380000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[    0.000000] RAMDISK: 5f192000 - 5f70f098
[    0.000000] Allocated new RAMDISK: 008ad000 - 00e2a098
[    0.000000] Move RAMDISK from 000000005f192000 - 000000005f70f097 to 008ad000 - 00e2a097
[    0.000000] ACPI: RSDP 000fa570 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 5f740000 00030 (v01 A M I  OEMRSDT  07000731 MSFT 00000097)
[    0.000000] ACPI: FACP 5f740200 00081 (v02 A M I  OEMFACP  07000731 MSFT 00000097)
[    0.000000] ACPI: DSDT 5f740370 03B3B (v01  P4i6G P4i6G133 00000133 INTL 02002026)
[    0.000000] ACPI: FACS 5f750000 00040
[    0.000000] ACPI: APIC 5f740300 0006C (v01 A M I  OEMAPIC  07000731 MSFT 00000097)
[    0.000000] ACPI: OEMB 5f750040 0003F (v01 A M I  OEMBIOS  07000731 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 639MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00011000 - 00017f00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008a80a0]    TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[    0.000000]   #4 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
[    0.000000]   #5 [00008a9000 - 00008ac091]              BRK ==> [00008a9000 - 00008ac091]
[    0.000000]   #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
[    0.000000]   #7 [00008ad000 - 0000e2a098]      NEW RAMDISK ==> [00008ad000 - 0000e2a098]
[    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0005f740
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0005f740
[    0.000000] On node 0 totalpages: 390863
[    0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 1279 pages used for memmap
[    0.000000]   HighMem zone: 162371 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 5f800000 (gap: 5f800000:9f600000)
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages at c1bf7000, static data 35612 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 387808
[    0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- debian-installer/language=pl console-setup/layoutcode?=pl
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 7819200 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0005f740)
[    0.000000] Memory: 1528208k/1563904k available (4565k kernel code, 34408k reserved, 2143k data, 540k init, 654600k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc078e000 - 0xc0815000   ( 540 kB)
[    0.000000]       .data : 0xc0575554 - 0xc078d308   (2143 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0575554   (4565 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] NR_IRQS:2304 nr_irqs:440
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2999.451 MHz processor.
[    0.001446] Console: colour VGA+ 80x25
[    0.001452] console [tty0] enabled
[    0.001517] Calibrating delay loop (skipped), value calculated using timer frequency.. 5998.90 BogoMIPS (lpj=11997804)
[    0.001551] Security Framework initialized
[    0.001597] AppArmor: AppArmor initialized
[    0.001608] Mount-cache hash table entries: 512
[    0.001853] Initializing cgroup subsys ns
[    0.001863] Initializing cgroup subsys cpuacct
[    0.001869] Initializing cgroup subsys memory
[    0.001880] Initializing cgroup subsys freezer
[    0.001883] Initializing cgroup subsys net_cls
[    0.001912] CPU: Trace cache: 12K uops, L1 D cache: 16K
[    0.001916] CPU: L2 cache: 1024K
[    0.001919] CPU: Physical Processor ID: 0
[    0.001921] CPU: Processor Core ID: 0
[    0.001927] mce: CPU supports 4 MCE banks
[    0.001944] CPU0: Thermal monitoring enabled (TM1)
[    0.001952] using mwait in idle threads.
[    0.001965] Performance Counters: no PMU driver, software counters only.
[    0.001974] Checking 'hlt' instruction... OK.
[    0.019884] ACPI: Core revision 20090521
[    0.030181] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.069870] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
[    0.072001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 5999.75 BogoMIPS (lpj=11999507)
[    0.004000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[    0.004000] CPU: L2 cache: 1024K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 0
[    0.004000] mce: CPU supports 4 MCE banks
[    0.004000] CPU1: Thermal monitoring enabled (TM1)
[    0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[    0.156965] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
[    0.156990] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.160050] Brought up 2 CPUs
[    0.160056] Total of 2 processors activated (11998.65 BogoMIPS).
[    0.160108] CPU0 attaching sched-domain:
[    0.160114]  domain 0: span 0-1 level SIBLING
[    0.160119]   groups: 0 1
[    0.160127] CPU1 attaching sched-domain:
[    0.160131]  domain 0: span 0-1 level SIBLING
[    0.160134]   groups: 1 0
[    0.160259] Booting paravirtualized kernel on bare hardware
[    0.160303] regulator: core version 0.5
[    0.160303] Time: 21:29:11  Date: 03/29/10
[    0.160303] NET: Registered protocol family 16
[    0.160303] EISA bus registered
[    0.160315] ACPI: bus type pci registered
[    0.160459] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[    0.160464] PCI: Using configuration type 1 for base access
[    0.161863] bio: create slab <bio-0> at 0
[    0.164679] ACPI: EC: Look up EC in DSDT
[    0.172803] ACPI: Interpreter enabled
[    0.172811] ACPI: (supports S0 S1 S3 S4 S5)
[    0.172847] ACPI: Using IOAPIC for interrupt routing
[    0.179566] ACPI: No dock devices found.
[    0.179726] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.179778] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[    0.179791] pci 0000:00:00.0: reg 10 32bit mmio: [0xfe800000-0xfebfffff]
[    0.179868] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
[    0.179876] pci 0000:00:02.0: reg 14 32bit mmio: [0xff280000-0xff2fffff]
[    0.179883] pci 0000:00:02.0: reg 18 io port: [0xec00-0xec07]
[    0.179941] pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff]
[    0.180056] pci 0000:00:1d.0: reg 20 io port: [0xdc00-0xdc1f]
[    0.180116] pci 0000:00:1d.1: reg 20 io port: [0xe000-0xe01f]
[    0.180176] pci 0000:00:1d.2: reg 20 io port: [0xe400-0xe41f]
[    0.180235] pci 0000:00:1d.3: reg 20 io port: [0xe800-0xe81f]
[    0.180303] pci 0000:00:1d.7: reg 10 32bit mmio: [0xff27fc00-0xff27ffff]
[    0.180367] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.180372] pci 0000:00:1d.7: PME# disabled
[    0.180470] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.180478] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[    0.180483] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO
[    0.180510] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[    0.180518] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[    0.180526] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[    0.180534] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[    0.180542] pci 0000:00:1f.1: reg 20 io port: [0xfc00-0xfc0f]
[    0.180550] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[    0.180608] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[    0.180674] pci 0000:01:02.0: reg 10 io port: [0xbc00-0xbc07]
[    0.180681] pci 0000:01:02.0: reg 14 io port: [0xb800-0xb803]
[    0.180689] pci 0000:01:02.0: reg 18 io port: [0xb400-0xb407]
[    0.180697] pci 0000:01:02.0: reg 1c io port: [0xb000-0xb003]
[    0.180704] pci 0000:01:02.0: reg 20 io port: [0xac00-0xac0f]
[    0.180712] pci 0000:01:02.0: reg 24 32bit mmio: [0xff0ffc00-0xff0ffcff]
[    0.180720] pci 0000:01:02.0: reg 30 32bit mmio: [0xff000000-0xff07ffff]
[    0.180740] pci 0000:01:02.0: supports D1 D2
[    0.180782] pci 0000:01:05.0: reg 10 io port: [0xa800-0xa8ff]
[    0.180790] pci 0000:01:05.0: reg 14 32bit mmio: [0xff0ef800-0xff0ef8ff]
[    0.180833] pci 0000:01:05.0: supports D1 D2
[    0.180836] pci 0000:01:05.0: PME# supported from D1 D2 D3hot D3cold
[    0.180841] pci 0000:01:05.0: PME# disabled
[    0.180881] pci 0000:00:1e.0: transparent bridge
[    0.180887] pci 0000:00:1e.0: bridge io port: [0xa000-0xbfff]
[    0.180892] pci 0000:00:1e.0: bridge 32bit mmio: [0xfef00000-0xff0fffff]
[    0.180905] pci_bus 0000:00: on NUMA node 0
[    0.180911] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.181018] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.183249] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.183386] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.183520] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.183654] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.183792] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.183929] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.184077] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.184213] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.184473] SCSI subsystem initialized
[    0.184527] libata version 3.00 loaded.
[    0.184527] usbcore: registered new interface driver usbfs
[    0.184527] usbcore: registered new interface driver hub
[    0.184527] usbcore: registered new device driver usb
[    0.184527] ACPI: WMI: Mapper loaded
[    0.184527] PCI: Using ACPI for IRQ routing
[    0.196014] Bluetooth: Core ver 2.15
[    0.196043] NET: Registered protocol family 31
[    0.196043] Bluetooth: HCI device and connection manager initialized
[    0.196043] Bluetooth: HCI socket layer initialized
[    0.196043] NetLabel: Initializing
[    0.196043] NetLabel:  domain hash size = 128
[    0.196043] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.196053] NetLabel:  unlabeled traffic allowed by default
[    0.196179] hpet clockevent registered
[    0.196184] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.196190] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.196198] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.212019] pnp: PnP ACPI init
[    0.212056] ACPI: bus type pnp registered
[    0.216617] pnp: PnP ACPI: found 11 devices
[    0.216621] ACPI: ACPI bus type pnp unregistered
[    0.216627] PnPBIOS: Disabled by ACPI PNP
[    0.216647] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[    0.216651] system 00:05: ioport range 0x800-0x87f has been reserved
[    0.216655] system 00:05: ioport range 0x480-0x4bf has been reserved
[    0.216661] system 00:05: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.216665] system 00:05: iomem range 0xff380000-0xffefffff has been reserved
[    0.216673] system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.216677] system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.216686] system 00:09: ioport range 0x680-0x6ff has been reserved
[    0.216690] system 00:09: ioport range 0x295-0x296 has been reserved
[    0.216699] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[    0.216704] system 00:0a: iomem range 0xc0000-0xdffff could not be reserved
[    0.216708] system 00:0a: iomem range 0xe0000-0xfffff could not be reserved
[    0.216712] system 00:0a: iomem range 0x100000-0x5f7fffff could not be reserved
[    0.216716] system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved
[    0.251452] AppArmor: AppArmor Filesystem Enabled
[    0.251473] pci 0000:01:02.0: BAR 6: address space collision on of device [0xff000000-0xff07ffff]
[    0.251500] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[    0.251505] pci 0000:00:1e.0:   IO window: 0xa000-0xbfff
[    0.251512] pci 0000:00:1e.0:   MEM window: 0xfef00000-0xff0fffff
[    0.251517] pci 0000:00:1e.0:   PREFETCH window: 0x60000000-0x600fffff
[    0.251534] pci 0000:00:1e.0: setting latency timer to 64
[    0.251540] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.251543] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.251547] pci_bus 0000:01: resource 0 io:  [0xa000-0xbfff]
[    0.251550] pci_bus 0000:01: resource 1 mem: [0xfef00000-0xff0fffff]
[    0.251553] pci_bus 0000:01: resource 2 pref mem [0x60000000-0x600fffff]
[    0.251556] pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
[    0.251560] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[    0.251619] NET: Registered protocol family 2
[    0.251781] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.252362] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.253468] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.254244] TCP: Hash tables configured (established 131072 bind 65536)
[    0.254248] TCP reno registered
[    0.254475] NET: Registered protocol family 1
[    0.254591] Trying to unpack rootfs image as initramfs...
[    0.697100] Switched to high resolution mode on CPU 1
[    0.700061] Switched to high resolution mode on CPU 0
[    2.172995] Freeing initrd memory: 5620k freed
[    2.182266] cpufreq-nforce2: No nForce2 chipset.
[    2.182310] Scanning for low memory corruption every 60 seconds
[    2.182480] audit: initializing netlink socket (disabled)
[    2.182514] type=2000 audit(1269898153.180:1): initialized
[    2.191693] highmem bounce pool size: 64 pages
[    2.191703] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    2.193624] VFS: Disk quotas dquot_6.5.2
[    2.193708] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.194461] fuse init (API version 7.12)
[    2.194571] msgmni has been set to 1718
[    2.194898] alg: No test for stdrng (krng)
[    2.194922] io scheduler noop registered
[    2.194925] io scheduler anticipatory registered
[    2.194928] io scheduler deadline registered
[    2.194986] io scheduler cfq registered (default)
[    2.195006] pci 0000:00:02.0: Boot video device
[    2.195209] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.195245] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.195428] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    2.195434] ACPI: Power Button [PWRF]
[    2.195510] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    2.195514] ACPI: Power Button [PWRB]
[    2.196051] processor LNXCPU:00: registered as cooling_device0
[    2.196058] ACPI: Processor [CPU0] (supports 8 throttling states)
[    2.196228] processor LNXCPU:01: registered as cooling_device1
[    2.199385] isapnp: Scanning for PnP cards...
[    2.553227] isapnp: No Plug & Play device found
[    2.554768] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.556553] brd: module loaded
[    2.557173] loop: module loaded
[    2.557276] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    2.557426] ata_piix 0000:00:1f.1: version 2.13
[    2.557450]   alloc irq_desc for 18 on node -1
[    2.557454]   alloc kstat_irqs on node -1
[    2.557466] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.557532] ata_piix 0000:00:1f.1: setting latency timer to 64
[    2.557658] scsi0 : ata_piix
[    2.557790] scsi1 : ata_piix
[    2.559703] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    2.559708] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    2.560508] pata_sil680 0000:01:02.0: version 0.4.9
[    2.560525]   alloc irq_desc for 23 on node -1
[    2.560528]   alloc kstat_irqs on node -1
[    2.560535] pata_sil680 0000:01:02.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.560560] sil680: 133MHz clock.
[    2.560714] scsi2 : pata_sil680
[    2.560838] scsi3 : pata_sil680
[    2.560903] ata3: PATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xac00 irq 23
[    2.560909] ata4: PATA max UDMA/133 cmd 0xb400 ctl 0xb000 bmdma 0xac08 irq 23
[    2.561464] Fixed MDIO Bus: probed
[    2.561516] PPP generic driver version 2.4.2
[    2.561692] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.561722] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    2.561746] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    2.561751] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    2.561823] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    2.565752] ehci_hcd 0000:00:1d.7: debug port 1
[    2.565761] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[    2.565771] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff27fc00
[    2.580513] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.580615] usb usb1: configuration #1 chosen from 1 choice
[    2.580663] hub 1-0:1.0: USB hub found
[    2.580678] hub 1-0:1.0: 8 ports detected
[    2.580770] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.580792] uhci_hcd: USB Universal Host Controller Interface driver
[    2.580848]   alloc irq_desc for 16 on node -1
[    2.580852]   alloc kstat_irqs on node -1
[    2.580861] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.580869] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.580874] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.580917] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.580951] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000dc00
[    2.581061] usb usb2: configuration #1 chosen from 1 choice
[    2.581098] hub 2-0:1.0: USB hub found
[    2.581111] hub 2-0:1.0: 2 ports detected
[    2.581175]   alloc irq_desc for 19 on node -1
[    2.581178]   alloc kstat_irqs on node -1
[    2.581185] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.581193] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    2.581197] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.581238] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    2.581270] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000
[    2.581389] usb usb3: configuration #1 chosen from 1 choice
[    2.581426] hub 3-0:1.0: USB hub found
[    2.581437] hub 3-0:1.0: 2 ports detected
[    2.581504] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.581512] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    2.581516] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.581557] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    2.581588] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
[    2.581696] usb usb4: configuration #1 chosen from 1 choice
[    2.581733] hub 4-0:1.0: USB hub found
[    2.581745] hub 4-0:1.0: 2 ports detected
[    2.581805] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.581812] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    2.581816] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    2.581861] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    2.581883] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e800
[    2.581985] usb usb5: configuration #1 chosen from 1 choice
[    2.582022] hub 5-0:1.0: USB hub found
[    2.582033] hub 5-0:1.0: 2 ports detected
[    2.582167] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    2.584787] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.584800] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.584927] mice: PS/2 mouse device common for all mice
[    2.585062] rtc_cmos 00:02: RTC can wake from S4
[    2.585112] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    2.585137] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    2.585286] device-mapper: uevent: version 1.0.3
[    2.585416] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    2.585521] device-mapper: multipath: version 1.1.0 loaded
[    2.585526] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.585691] EISA: Probing bus 0 at eisa.0
[    2.585730] EISA: Detected 0 cards.
[    2.585864] cpuidle: using governor ladder
[    2.585869] cpuidle: using governor menu
[    2.586621] TCP cubic registered
[    2.586793] NET: Registered protocol family 10
[    2.587475] lo: Disabled Privacy Extensions
[    2.587967] NET: Registered protocol family 17
[    2.587995] Bluetooth: L2CAP ver 2.13
[    2.587998] Bluetooth: L2CAP socket layer initialized
[    2.588022] Bluetooth: SCO (Voice Link) ver 0.6
[    2.588025] Bluetooth: SCO socket layer initialized
[    2.588072] Bluetooth: RFCOMM TTY layer initialized
[    2.588077] Bluetooth: RFCOMM socket layer initialized
[    2.588080] Bluetooth: RFCOMM ver 1.11
[    2.588138] Using IPI No-Shortcut mode
[    2.588227] PM: Resume from disk failed.
[    2.588248] registered taskstats version 1
[    2.588382]   Magic number: 2:316:501
[    2.588479] rtc_cmos 00:02: setting system clock to 2010-03-29 21:29:14 UTC (1269898154)
[    2.588484] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.588487] EDD information not available.
[    2.605121] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.716972] ata2.01: ATAPI: HL-DT-ST GCE-8525B, 1.03, max UDMA/33
[    2.732454] ata2.01: configured for UDMA/33
[    2.733030] scsi 1:0:1:0: CD-ROM            HL-DT-ST CD-RW GCE-8525B  1.03 PQ: 0 ANSI: 5
[    2.734587] sr0: scsi3-mmc drive: 40x/52x writer cd/rw xa/form2 cdda tray
[    2.734592] Uniform CD-ROM driver Revision: 3.20
[    2.734717] sr 1:0:1:0: Attached scsi CD-ROM sr0
[    2.734785] sr 1:0:1:0: Attached scsi generic sg0 type 5
[    2.775805] ata3.00: ATA-7: ST3320620A, 3.AAE, max UDMA/100
[    2.775809] ata3.00: 625142448 sectors, multi 16: LBA48
[    2.842383] ata3.00: configured for UDMA/100
[    2.842487] scsi 2:0:0:0: Direct-Access     ATA      ST3320620A       3.AA PQ: 0 ANSI: 5
[    2.842669] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    2.842693] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.842772] sd 2:0:0:0: [sda] Write Protect is off
[    2.842776] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.842812] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.842999]  sda: sda1 sda2 sda3 < sda5 sda6 >
[    2.905612] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.192303] ata4.00: HPA unlocked: 625140335 -> 625142448, native 625142448
[    3.192310] ata4.00: ATA-7: ST3320620A, 3.AAE, max UDMA/100
[    3.192313] ata4.00: 625142448 sectors, multi 16: LBA48
[    3.238020] ata4.00: configured for UDMA/100
[    3.238141] scsi 3:0:0:0: Direct-Access     ATA      ST3320620A       3.AA PQ: 0 ANSI: 5
[    3.238306] sd 3:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    3.238347] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    3.238406] sd 3:0:0:0: [sdb] Write Protect is off
[    3.238410] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.238447] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.238618]  sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 >
[    3.303129] sd 3:0:0:0: [sdb] Attached SCSI disk
[    3.303164] Freeing unused kernel memory: 540k freed
[    3.303975] Write protecting the kernel text: 4568k
[    3.304038] Write protecting the kernel read-only data: 1836k
[    3.476257] Linux agpgart interface v0.103
[    3.483358] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[    3.483989] agpgart-intel 0000:00:00.0: detected 8060K stolen memory
[    3.495158] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[    3.582998] [drm] Initialized drm 1.1.0 20060810
[    3.674509] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.674522] i915 0000:00:02.0: setting latency timer to 64
[    3.686654] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    3.686708] 8139cp 0000:01:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    3.692082] 8139too Fast Ethernet driver 0.9.28
[    3.692150]   alloc irq_desc for 22 on node -1
[    3.692154]   alloc kstat_irqs on node -1
[    3.692167] 8139too 0000:01:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    3.693997] eth0: RealTek RTL8139 at 0xa800, 00:19:66:61:3e:d8, IRQ 22
[    3.847181] [drm] fb0: inteldrmfb frame buffer device
[    3.847197] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.935127] render error detected, EIR: 0x00000010
[    3.935133] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking
[    3.935147] render error detected, EIR: 0x00000010
[    3.942118] [drm] DAC-5: set mode 1920x1080 17
[    3.954732] Console: switching to colour frame buffer device 240x67
[    4.517165] xor: automatically using best checksumming function: pIII_sse
[    4.536003]    pIII_sse  :  4535.000 MB/sec
[    4.536010] xor: using function: pIII_sse (4535.000 MB/sec)
[    4.539316] device-mapper: dm-raid45: initialized v0.2594b
[    6.427466] ISO 9660 Extensions: Microsoft Joliet Level 3
[    6.446614] ISO 9660 Extensions: RRIP_1991A
[    6.672618] aufs 2-standalone.tree-30-20090727
[    6.882426] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   60.960295] udev: starting version 147
[   61.810525] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   61.921991] intel_rng: FWH not detected
[   62.089395] psmouse serio1: ID: 10 00 64
[   62.639211] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[   63.464839] ip_tables: (C) 2000-2006 Netfilter Core Team
[   66.263312] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   76.404016] eth0: no IPv6 routers present
[   79.108203] lp: driver loaded but no devices found
[   79.268299] ppdev: user-space parallel port driver
[   86.662888] CPU0 attaching NULL sched-domain.
[   86.662898] CPU1 attaching NULL sched-domain.
[   86.680191] CPU0 attaching sched-domain:
[   86.680200]  domain 0: span 0-1 level SIBLING
[   86.680206]   groups: 0 1
[   86.680216]   domain 1: span 0-1 level MC
[   86.680221]    groups: 0-1 (__cpu_power = 2048)
[   86.680234] CPU1 attaching sched-domain:
[   86.680239]  domain 0: span 0-1 level SIBLING
[   86.680244]   groups: 1 0
[   86.680252]   domain 1: span 0-1 level MC
[   86.680256]    groups: 0-1 (__cpu_power = 2048)
[   89.415171] CPU0 attaching NULL sched-domain.
[   89.415191] CPU1 attaching NULL sched-domain.
[   89.424628] CPU0 attaching sched-domain:
[   89.424635]  domain 0: span 0-1 level SIBLING
[   89.424639]   groups: 0 1
[   89.424649] CPU1 attaching sched-domain:
[   89.424652]  domain 0: span 0-1 level SIBLING
[   89.424655]   groups: 1 0


modułu siimage nie ładuje (domyślnie), ALE

w trybie livecd narzędzie Disk utility i GParted widzi 2 dyski...

i pytanie - gdzie w modconf szukać ew. siimage ?

buninek

Jak widać kontroler ATA bez problemu jest obsługiwany a dyski widoczne.
Moduł to nie siimage tylko chyba pata_sil680.

Uwaga! To jest zwykły fake raid. W linuksie za to odpowiada dmraid.

Wrzuć do wysukiwarki "+dmraid +ubuntu +faq".

Konfiguruj, jeśli koniecznie chcesz mieć dostęp do niego z poziomu linuksa.
Ja się zapytam jaki to ma sens i po co? Wspóldzielić ten RAID między dwa systemy.
A jaki system plików? Ntfs-3g!?
Wydajność pod linuksem średnia.

Raptor77

w przypadku większości tego typu kontrolerów, zwanych softRAID, funkcje macierzy realizowane są przez sterowniki - w związku z czym pod windowsem działa to ok ale dla linuxa trzeba zrobić to inaczej - utworzyć partycje pod raid, spiać je i dopiero utworzyć właściwą partycje na woluminie raid

w ubuntu 9.x można bez problemu zrobić takiego raida z instalatora - sam korzystałem z textowej wersji i działa bez problemu
i7|GTX570|SSD|27" | ATV2|XMBC|3TB NAS|40"|5.1

Szopler